DIY living room crown molding application
DIY Living Room Crown Molding Application
Crown molding is a decorative trim that can add style and elegance to any room. It is typically installed around the top of walls, where it meets the ceiling. Crown molding can be made from a variety of materials, including wood, MDF, and polyurethane.
Installing crown molding is a relatively simple project that can be completed in a few hours. However, it is important to follow the steps carefully to ensure that the molding is installed correctly.
Tools and Materials
The following tools and materials will be needed to install crown molding:
- Tape measure
- Pencil
- Level
- Saw
- Miter saw
- Sander
- Staple gun
- Wood filler
- Paint
- Primer
Instructions
- Measure the room. The first step is to measure the room to determine how much crown molding you will need. To do this, measure the length of each wall where you will be installing the molding. Add 1 inch to each measurement to allow for overlap.
- Cut the molding. Once you have determined the length of molding you need, you can cut it to size. To do this, use a miter saw to cut the molding at a 45-degree angle.
- Install the molding. To install the molding, start by attaching a piece of molding to the wall at the corner of the room. Use a level to make sure that the molding is installed straight. Then, attach the molding to the wall using a staple gun.
- Continue installing the molding. Continue attaching the molding to the wall, overlapping each piece by 1 inch. Make sure that the molding is installed tightly against the wall and that the joints are flush.
- Sand the molding. Once the molding is installed, it will need to be sanded to smooth out any rough edges. Use a sanding block to sand the molding in the direction of the grain.
- Apply wood filler. Fill any gaps or holes in the molding with wood filler. Allow the wood filler to dry completely, then sand it smooth.
- Paint the molding. Once the wood filler is dry, you can paint the molding. Use a primer to prepare the molding, then apply two coats of paint.
Tips
- Use a sharp saw to make clean cuts.
- Use a level to make sure that the molding is installed straight.
- Attach the molding tightly to the wall.
- Sand the molding in the direction of the grain.
- Fill any gaps or holes in the molding with wood filler.
- Paint the molding to match the rest of the room.
Troubleshooting
If the molding is not installed correctly, it can be difficult to fix. If the molding is crooked, you can try to remove it and reinstall it. If the molding is not tight against the wall, you can try to add more staples. If the molding is cracked or damaged, you can try to repair it with wood filler.
Final Thoughts
Installing crown molding is a relatively simple project that can add style and elegance to any room. By following the steps carefully, you can install crown molding that will look great for years to come.
