DIY copper table fire pit
Copper is a beautiful and durable material that can be used to create a variety of outdoor projects, including fire pits. A copper table fire pit is a great way to add warmth and ambiance to your patio or backyard. It's also a fun and easy project that you can complete in a weekend.
Materials
- Copper sheet metal (16 gauge)
- 1/2-inch copper pipe (10 feet)
- 1/2-inch copper tubing (10 feet)
- Copper fittings
- Flux
- Solder
- Safety glasses
- Gloves
- Tin snips
- Hacksaw
- Drill
- Sawzall
- Level
- Tape measure
Instructions
-
Cut the copper sheet metal. You will need to cut the copper sheet metal into the following pieces:
- One 24-inch by 36-inch piece for the base
- One 12-inch by 18-inch piece for the fire bowl
- One 6-inch by 12-inch piece for the legs
-
Bend the copper sheet metal. Use a hammer and anvil to bend the copper sheet metal into the following shapes:
- The base should be a square with 24-inch sides.
- The fire bowl should be a circle with a 12-inch diameter.
- The legs should be two 6-inch by 12-inch rectangles.
- Assemble the fire pit. Assemble the fire pit by following these steps:
- Place the fire bowl in the center of the base.
- Align the legs with the corners of the base.
- Solder the legs to the base.
- Solder the fire bowl to the base.
-
Install the copper pipe. Cut the copper pipe into two 5-foot pieces. Bend each piece of pipe into a U-shape. Solder the U-shaped pipes to the bottom of the fire bowl.
-
Install the copper tubing. Cut the copper tubing into four 12-inch pieces. Solder the copper tubing to the U-shaped pipes.
- Add the fire pit liner. Place a fire pit liner in the fire bowl.
- Enjoy your new fire pit! Light a fire in the fire pit and enjoy the warmth and ambiance.
Tips
- When cutting the copper sheet metal, use a sharp blade and wear safety glasses.
- When bending the copper sheet metal, use a hammer and anvil. Be careful not to bend the metal too much or it will crack.
- When soldering the copper pieces together, use flux and solder. Follow the instructions on the flux and solder package.
- Make sure that the fire pit is level before you light a fire in it.
- Never leave a fire unattended.
Safety
Fire pits can be dangerous, so it's important to take precautions to stay safe. Here are some safety tips:
- Never light a fire in a fire pit that is not level.
- Never leave a fire unattended.
- Keep children and pets away from the fire pit.
- Do not put flammable materials near the fire pit.
- Be careful not to spill any fuel on the ground around the fire pit.
- Extinguish the fire completely before leaving the area.
By following these tips, you can enjoy your copper table fire pit safely.
DIY Copper Table Fire Pit
Copper table fire pits are a beautiful and stylish way to add warmth and ambiance to your outdoor space. They're also relatively easy to build, making them a great project for DIY enthusiasts.
Materials
To build a copper table fire pit, you will need the following materials:
- A copper sheet, at least 18 gauge and 1/8 inch thick
- A copper pipe, 1 inch in diameter and 18 inches long
- A fire pit ring, made of metal or fireproof material
- A fire pit poker
- A fire starter
- A sealant
- A drill
- A saw
- A metal file
- A sander
- Safety glasses
- Gloves
Tools
You will also need the following tools to build a copper table fire pit:
- A drill
- A saw
- A metal file
- A sander
- A sealant
- A level
- A tape measure
Instructions
To build a copper table fire pit, follow these steps:
- Cut the copper sheet to size. You will need to cut the copper sheet to the same size as your fire pit ring.
- Drill holes in the copper sheet. You will need to drill four holes in the copper sheet, one in each corner. The holes should be large enough to fit the copper pipe through.
- Thread the copper pipe through the holes. Thread the copper pipe through the holes in the copper sheet, so that the pipe is centered in the sheet.
- Secure the copper pipe to the copper sheet. Secure the copper pipe to the copper sheet using a sealant.
- Add the fire pit ring. Place the fire pit ring inside the copper sheet.
- Add the fire starter. Add a fire starter to the fire pit ring.
- Light the fire. Light the fire starter and allow the fire to burn for several minutes.
- Enjoy your copper table fire pit! Once the fire is established, you can sit back and enjoy the warmth and ambiance of your new copper table fire pit.
Tips
Here are a few tips for building a copper table fire pit:
- Use a fire pit ring that is made of metal or fireproof material. This will help to protect the copper sheet from the heat of the fire.
- Use a sealant that is specifically designed for use with copper. This will help to protect the copper sheet from the elements.
- Be careful not to over-tighten the screws when securing the copper pipe to the copper sheet. This could damage the copper sheet.
- Always wear safety glasses and gloves when working with copper. Copper can be sharp and can cause injury if it is not handled properly.
Safety
Copper table fire pits can be dangerous if they are not used properly. Here are a few safety tips to keep in mind when using a copper table fire pit:
- Never leave a fire unattended.
- Always keep children and pets away from the fire.
- Be sure to extinguish the fire completely before leaving the area.
- Do not use flammable materials to start the fire.
- Use a fire pit screen to protect the fire from wind.
By following these tips, you can enjoy your copper table fire pit safely and without incident.
