DIY gas table fire pit
DIY Gas Table Fire Pit
A gas table fire pit is a great way to add ambiance and warmth to your outdoor living space. They're also relatively easy to build, making them a great DIY project.
In this article, we'll walk you through the steps of building your own gas table fire pit. We'll provide detailed instructions and tips, so you can be sure your project is a success.
Materials
To build a gas table fire pit, you'll need the following materials:
- A 24-inch round metal table
- A 24-inch round metal fire bowl
- A 1-inch thick piece of tempered glass
- A roll of 1-inch wide silicone sealant
- A roll of 1-inch wide sheet metal flashing
- A roll of 1-inch wide aluminum duct tape
- A propane tank and regulator
- A gas line
- A set of pliers
- A hacksaw
- A drill
- A sawzall
- A tape measure
- A level
- A pencil
- A safety mask
- Safety glasses
Tools
To build a gas table fire pit, you'll need the following tools:
- A hammer
- A screwdriver
- A wrench
- A wire brush
- A grinder
- A welding torch
- A cutting torch
Instructions
To build a gas table fire pit, follow these steps:
- Assemble the table. If you're using a new table, assemble it according to the manufacturer's instructions. If you're using a used table, make sure it's in good condition and sturdy enough to support the weight of the fire bowl and glass.
- Cut the fire bowl. The fire bowl should be slightly smaller than the table top. To cut the fire bowl, use a hacksaw or sawzall to cut along the inside of the fire bowl's rim.
- Drill holes in the fire bowl. Drill four 1/2-inch holes in the bottom of the fire bowl. These holes will allow the gas to flow into the fire bowl.
- Install the fire bowl. Place the fire bowl in the center of the table top. Use a level to make sure the fire bowl is level. Secure the fire bowl to the table top with screws or bolts.
- Install the glass. Cut a piece of tempered glass to fit the top of the fire bowl. Apply a bead of silicone sealant around the edge of the glass. Press the glass into place.
- Install the flashing. Cut a piece of sheet metal flashing to fit around the edge of the fire bowl. Apply a bead of silicone sealant around the edge of the flashing. Press the flashing into place.
- Tape the seams. Use aluminum duct tape to tape the seams between the glass, flashing, and fire bowl. This will help to seal the fire pit and prevent leaks.
- Install the propane tank and regulator. Attach the propane tank to the regulator. Connect the regulator to the gas line.
- Turn on the gas. Turn on the propane tank and light the fire pit.
Tips
- When choosing a table for your gas table fire pit, make sure it's made of a non-flammable material.
- When cutting the fire bowl, be careful not to cut yourself.
- When drilling holes in the fire bowl, be careful not to drill into the gas lines.
- When installing the glass, make sure the silicone sealant is completely dry before using the fire pit.
- When using the fire pit, make sure the propane tank is turned off when you're not using it.
- Never leave the fire pit unattended.
Safety
Gas table fire pits can be dangerous if they're not used properly. Here are some safety tips to keep in mind:
- Always read and follow the manufacturer's instructions.
- Never use a gas table fire pit if it's damaged.
- Never use the fire pit near flammable materials.
- Never leave the fire pit unattended.
- Keep children and pets away from the fire pit.
- Turn off the propane tank and close the valve when you're not using the fire pit.
By following these tips, you can enjoy your gas table fire pit safely.
Conclusion
A gas table fire pit is a great way to add ambiance and warmth to your outdoor living space. They're also relatively easy to build, making them a great DIY project.
By following the instructions in this article, you can build your own gas table fire pit in just
DIY Gas Table Fire Pit
A gas table fire pit is a great way to add ambiance and warmth to your outdoor space. It's also a more affordable option than a traditional wood-burning fire pit. This project is relatively easy to complete, and it can be done in a weekend.
Materials
- 24-inch round metal table
- 12-inch round metal plate
- 12-inch round metal ring
- 4 pieces of 1-inch PVC pipe
- 4 caps for 1-inch PVC pipe
- 10 feet of 1/2-inch gas line
- 10 feet of 1/4-inch gas line
- 1 gas shut-off valve
- 1 gas regulator
- 1 gas burner
- 1 bag of fire glass
- Duct tape
- Pliers
- Wire cutters
- Screwdriver
- Tape measure
- Level
- Safety glasses
Tools
- Welder
- Grinder
- Drill
- Saw
- Sander
- Tape measure
- Level
- Safety glasses
Instructions
- Cut the metal table in half. Use a welder to cut the metal table in half. The table should be cut in half horizontally, so that you have two equal halves.
- Grind the edges of the metal table. Use a grinder to grind the edges of the metal table. This will help to prevent the metal from rusting.
- Drill holes in the metal table. Drill holes in the metal table for the gas line. The holes should be located in the center of the table, and they should be spaced evenly.
- Attach the gas line to the metal table. Use 1/2-inch gas line to connect the gas shut-off valve to the gas burner. Then, use 1/4-inch gas line to connect the gas burner to the holes in the metal table.
- Attach the metal plate to the metal ring. Use duct tape to attach the metal plate to the metal ring. The metal plate should be centered on the metal ring.
- Place the metal plate on top of the metal table. Place the metal plate on top of the metal table. The metal plate should be centered on the table.
- Add the fire glass. Add the fire glass to the metal table. The fire glass should cover the bottom of the table.
- Turn on the gas. Turn on the gas and light the burner. The fire pit should be lit.
Tips
- Use a fire pit mat to protect your patio from heat and sparks.
- Keep children and pets away from the fire pit.
- Never leave the fire pit unattended.
- Extinguish the fire pit when you are finished using it.
Safety
Gas table fire pits can be dangerous if they are not used properly. Always follow these safety tips:
- Use a fire pit mat to protect your patio from heat and sparks.
- Keep children and pets away from the fire pit.
- Never leave the fire pit unattended.
- Extinguish the fire pit when you are finished using it.
By following these tips, you can enjoy your gas table fire pit safely.
